Lizing Sany STC550T6 SANY TRUCK CRANE 55 TONS LIFTING CAPACITY 【ACHIEVE】TOP CONDITION!!!

STC550T6 SANY TRUCK CRANE 55 TONS LIFTING CAPACITY 【ACHIEVE】TOP CONDITION!!!

Hip length at full extension

52m

Maximum climbing grade

47%

Maximum speed

9okm/h

Speed parameter

Maximum single rope speed of main winch

145m/min

Full extension of boom/Shorten time

430/450s

Full lifting of boom/Fall time

70/90s

Maximum giant slalom speed

1.8r/min

Weight parameters

Total weight of complete machine

44000kg

Maximum counterweight

10.5t

Dimensional parameters

Overall length of the machine

14240mm

Full width of the whole machine

2800mm

Full height of the whole machine

3820mm

Outrigger span（HorizontalxLongitudinal）

7.4x6.13m

Dynamic parameters

Engine model

WeichaiWP10.375E53(CountryV)

Maximum engine power

276/1900kW/rpm

Maximum output torque of engine

1650/(1200-1600)N·m/rpm

Driving parameters

Maximum travel speed

90km/h

Minimum Turning Radius

12m

Maximum climbing gradient

47%

Angle of approach

17°

Departure angle

15°

Minimum ground clearance

320mm

Humanized control system

The control room can be tilted up to 0-20° to make aerial work more comfortable and safer; the movable counterweight can be freely matched, and the lifting and lowering can be controlled; the mechanical structure is mounted, and the short-distance transportation and unloading are safe and reliable; the machine hangar is streamlined, and the use and maintenance are more convenient.

SMART HYDRAULICSOMPACT DESIGN

Larger flow ensures higher efficiency, like higher speed of wire rope reeling. Shunted mode of independently controlled combined motions realizes higher stability, like simultaneous vibration-free luffing and hoisting.

ELECTRICAL CONTROL

Valves and other hydraulic components realize better inching motion performance. Load-sensing and constant-power techniques optimize fuel efficiency. Simple harness and steady signal transmission. Real-time auto monitoring of operation conditions.

Efficient & Unique Hydraulic System

Triple gear pump, load feedback and constant power control are applied to provide strong lifting capacity and good micro-mobility. Unique steering buffer design guarantees smooth braking operation.

Intelligent Electronic Control

Self-developed controller SYMC special for engineering machinery is configured. The adoption of CAN-bus full-digital network control technology ensures stable control signal, simple harness, and high reliability. Timely feedback of data information can achieve the monitoring of the overall working status in real time.